Microscopios de soldadura PUK

My expectations for the PUK U5+ were very high and were met all along the line. Working with the PUK U5+ is very simple and uncomplicated.

An artist carefully compiles his tools because he uses them to express his thoughts and ideas through his hands. The high expectations of yourself must also be placed on the tools. That is why I only work with professional tools and machines.

For the production of my kinetic solar sculptures I prefer to use round steel rods up to 4 mm and sheets up to 1 mm thick. In the past years I have tried many techniques to optimally combine these materials. I have already used some processes, such as TIG welding, brazing with hydrogen, spot welding or soft soldering. None of these connection techniques met my high standards.

One day I became aware of the PUK U5+ welding system from Lampert, which I had never seen before. The first-class technical support from the Lampert company was able to advise me "on point" what the possibilities of the PUK U5+ are.

My expectations for the PUK U5+ were very high. But these were met all along the line. Working with the PUK U5+ is very simple and uncomplicated. It feels like holding a thick pencil in your hand, easy to handle, safe and accurate.

I usually only rave about Swiss made machines. But I with pleasure took the PUK U5+ from Lampert, made in Germany, in my train of machines.

Working with PUK 2 since 2006.

My favorite cocktail is; PUK, argon and titanium.

If I didn't have the PUK I wouldn't have been able to make some of my best titanium pieces.

I bought my PUK2 in 2006, right at the time I opened my own workshop: www.josemarin.net.

At first, I used it in the creation of gold and platinum jewellery and in these three directions:

1. Repairing delicate pieces with precious stones which cannot be subjected to fire, this allows me to intervene on the jewels without dismantling the stones.
2. Pre-assembly of complex parts that I must later weld with a port of soldering and the aid of the torch.
3. Creation of impossible pieces. For example, mounting a platinum band with diamonds passing over an emerald, this would be unthinkable by the traditional method of fire welding.

At present it is my great help for the creation of my pieces of titanium and Timascus, so far I have managed to do everything I set out to do.

I must admit that my PUK2 is a very old version, with limitations for silver and bronze, but otherwise it is a perfect machine and very resistant, in 14 years I have not had any breakdowns.

As my brother and me started our own business, the PUK 5 was our first purchase along with two workbenches. We both had very good experience with the PUK 2 and PUK 04 and therefore knew that this wonderful device would become indispensable for us.

The PUK can be summarized in one sentence: "easy to learn and hard to master". Anyone could tack weld and joint parts after a few minutes. But the incredibly diverse possible field of application arises over the time and growing experience. Due to the very well calibrated default settings that the PUK 5 comes with, you can take countless challenges directly. With the experience at what angle, from what side and with which setting the respective welds work best, the joints are getting cleaner.

We work with the welder every day and the results are impressive and yet we have the feeling that we have not yet exhausted the "PUK potential".

With the PUK I brought building custom made radio-controlled construction models to the next level!

I am a perfectionist and I try to build my radio-controlled construction models to the highest quality and detail. I was looking for a device that can actually allow me to achieve this goal. Previously I was not able to work with steel or stainless steel, and because of the fine detail and precision work I was not able to weld with a normal TIG welder. I was recommended by a mate of mine who saw a demonstration of the PUK welder at an expo. I contacted LAMPERT, explained situation and they advised me the exact equipment I needed. Early 2017 I purchased the M200 which was shipped to Australia. LAMPERT guided me in the initial stages via Skype support how to use the machine. This was very clear and now after almost 3 years of use I cannot do without it. The amount of precision and welding size exactly replicates the scale and strength needed for my models. I am now able to work with various materials and stainless steel is my favorite. I highly recommend this machine to any serious and professional model builder.

Since 2002 we are still using Lampert’s excellent primary model of fine welding devices (PUK 111) in our local jewellery manufacturing by at least 10 professional goldsmiths on a daily basis.

Lampert PUK a must for every Jeweller

I invested in a PUK 5 welder and was able to obtain a pay back within 6 Months. The PUK enables me to do additional repair and restoration of jewellery over traditional flame soldering methods through less heat dispersion, pinpoint control and seamless joints. I selected the PUK 5 over other welders for its quality, support service, no maintenance requirements and end welding results.

I have used various models of the PUK over the past 15 years and currently have a PUK5 at my bench. I have yet to find a more versatile machine for a jeweller’s workshop. Only imagination limits application where the PUK is involved. Whether its mounting, repair work, stone setting, engraving, or otherwise, the PUK proves itself invaluable – no matter the metal or alloy.

Sceptical? Drop by my workshop and see for yourself.

I made first experience with a PUK back in 2003 in State Drawing Academy Hanau. It was the PUK111 and I instantly fell in love with it.

With PUK’s help I can realize any of my ideas. It makes welding of different metals and combining them with different materials a lot easier. Especially since I often use very thin metal sheets and wires, the PUK is the perfect tool for me.

I had different PUK models in my workshop already – the PUK 3s, PUK 04 and now the PUK5 – and every new model has offered an increased accuracy and improved welding results.

That is why the PUK has become one of the most important pieces of equipment in my workshop.

I must say that nowadays working without PUK is unthinkable for me!

You may take anything but my PUK from me!!!

I use it for everything made of gold, silver, steel, titanium and platinum.
I work easily on claws without having to remove the stones before.

The PUK is perfect for fixing the parts prior to soldering, for different micro repairs and also allows me to work on watches (crowns, shafts, gears and bracelets).

My PUK is a PUK3s professional plus and since I bought it, it paid for itself within the first six months already.

I think every goldsmith workshop needs a PUK to speed up the jewellery repairs and production.

Doing jewellery repairs, the ability to add small areas of metal is vital and was missing for the first 25 years of my time as a jeweller.
Then I heard about the welders that were becoming available so I bought a Lampert PUK3S and several years later I am still using it for most of the repairs that I do.
It paid for itself in the first year because it saves me so much time.
It opens up new possibilities such as repairing bracelets without having to refinish them all over, retipping stones like emeralds without removing them, tacking things together before soldering, repairing porosity etc. In most cases it's faster and cleaner than soldering.

I regard it as an essential tool for manufacturing and repairing jewellery and can't imagine working without it.